Showing posts with label fabric care. Show all posts
Showing posts with label fabric care. Show all posts

August 31, 2013

Stain Removal For Water Damaged Clothing

We clean hundreds of items of vintage clothing each month, and with this much laundry, we have learned a great deal about stain removal and the particulars of collectible clothing care.  Water damaged clothing is an especially frustrating stain, because the stain's components are concentrated along the edge of the water itself, leaving a ring that is hard to remove.
 
A friend recently brought over this silvery white 1960s brocade jacket that had a beautiful look to it, but was unfortunately water damaged.  Can it be fixed?
 
 
The first technique we try with water damage like this is a long soak in OxiClean.  If the garment cannot handle OxiClean, a whitener like borax or washing soda can be helpful, or just a strong detergent. 
 
After several hours soaking we would assess the stains, and if they had lessened we would repeat the soak.  If they had not lessened at all, we would try a different solvent, perhaps a color-safe bleach or hydrogen peroxide.  With water damaged clothing, we normally find these soaks have to be repeated at least 2-3 times, and if the garment can handle a direct application of detergent or another solvent, we will also apply it directly to the stain to sit for a few hours.
 
 
Once the stain has lifted, a normal wash or dry cleaning is in order.  In the case of this jacket, it had some fray beginning at the edges that were most often used (along the buttons and their closing loops).  A vintage clothing professional would protect these with nylon mesh before cleaning to avoid further fray.  In this case, however, we discussed the possibility of replacing the buttons, and perhaps the loops as well, because the fraying had become rather noticeable.
 
This particular jacket is capable of withstanding a hand wash and soak, even though it is a brocade. But for garments you are afraid to clean yourself, or dry clean only items, leave it to a professional.  This warrants a warning - be aware that if you take a garment to a dry cleaner, they will finish its cleaning with a steam or pressing.  This heat can actually set the stains in place (if the cleaner was unable to remove them). 
 
A considerate cleaner will omit this step if you ask, but be prepared to receive a wrinkled garment.  We only ask for this if we plan to work on the item further, in case the stains remain after the dry cleaning is complete.
 
Unfortunately water damaged clothing is relatively common here in southwest Florida.  We visit lots of homes undergoing a clean-out, and because Florida closets are humid, they are a notorious breeding ground for mildew.  It's important to monitor your storage spaces to avoid this kind of slow but serious damage. 
 
Basic techniques include:
  • leaving the closet doors open
  • using non-carpeted flooring in the closet
  • keeping clothes protected with muslin garment bags (not plastic)
  • being sensitive to changes in odor
In garages, the humidity is coupled with the potential for flooding.  A malfunctioning water heater or a broken washing machine can spread an inch or more of water across a garage floor in just minutes.  The same issue is true for basements.  If you store clothing or other valuables in your garage or basement, use wooden pallets as a protective layer below boxed items.  Keep clothing protected with plastic (not air-tight but as a cover) if you store items where plumbing is located above.
 

December 09, 2011

Used Clothing Shopping Tip

When I was a teenager, I was so into vintage clothing that I spent my spare time at the library reading stain guides. No kidding.

Here's a general rule I picked up back then:

Water-based stains (like juice or dirt) will be held by natural fibers (linen, cotton, wool, silk) and repelled by synthetic fabrics. Oil-based stains (like greasy food or lotion) are held by synthetic fabrics and repelled by natural ones.

It's come in handy time and time again, when I'm shopping for vintage clothes and need to know whether some stain will likely disappear with a bit of effort. Some stains are merely on the surface, as the fiber is relatively impenetrable to the stain. Others have soaked in and will need soaking in turn.

Then there's also the combination stain, like perspiration or lipstick, which contains both oil-based and water-based components. Most stain types can be figured out with a bit of thought & common sense.

Ladies dancing in vintage dresses, likely cotton or rayon, in the 1950s.
The perspiration created from dancing so gaily would be
combination stains if not washed out - both body oil and water from sweat.

There are plenty of other questions surrounding this principle, such as how to identify stain types (is this dust or dye transfer?) and fiber content (is this silk or rayon?). I'll work on tackling those topics in another post.

Until then, Vixens, happy shopping!

References:
Woman: A Celebration, edited by Peter Fetterman

August 04, 2011

Save Your Sweaters! How to Prevent Pilling & Pulling

There's nothing worse than buying a sweater and then discovering after one wash that its fresh appearance has disappeared! Pilling is the most common reason for that worn look on sweaters. Those little fuzzy balls or bits of fluff that show up on the surface of your knits are due to active use, where the garment's surface is rubbed over time, and also from machine washing. Sweaters and other knits are also subject to stretching and pulling out of shape, so they can require particular handling & storage. Also, knits of animal hair (like wool) should never go in the washing machine, unless you want your sweater shrunken to fit Fido!

To avoid pilling, we recommend hand washing your sweaters, especially those that have looser textures, applied embellishments or openwork patterns. For those that are machine washable, at least turn them inside out before tossing into the washer. If you have a pilling problem already, you can use an electric piller/fabric shaver (found at stores like Target) that runs on batteries or through a wall outlet.


Electric shavers are a great way to take 'five o'clock shadow' off your knits.

Fabric shavers are easy for removing pills on a flat knit, but they should not be used on knits with naps, textures or lofty surfaces. For any snags or loose ends of yarn, you can easily remedy this with a "knit picker". These are hook-like tools with an eye that draws the yarn from the outside of the garment to the inside. They're sold at sewing shops.


A knit picker. This convenient tool is great to keep in your handbag.

To avoid stretching your knits out of shape, it helps to be aware of their stretching limits while you wear them, but the most common over-stretching happens in storage rather than on the body. Because of this, we fold all knits flat for storage rather than hanging them. Hanging a sweater on a hanger can develop stretched-out humps at the shoulders where the knit has pulled down over the hanger's "shoulders" over time. This is most prevalent with heavy sweaters on narrow hangers (wire hangers are a sweater's death sentence), but it can even happen with lightweight sweaters, particularly if stored in more humid climates.


The dreaded 'hanger hump'.

If you need to hang your sweaters, use padded, thick hangers that match the width of the knit's shoulders. For shoulder-less items (like tube tops) and heavier or longer items (like dresses or beaded sweaters), use a hanger with a bottom bar so that the knit can be folded over and hung from the bar. This more evenly distributes the weight of the knit, so it's less likely to stretch out. The savviest clothes-horse will cycle her knits by season, so that any knit in the closet is hung up only while in active use, and then stored folded the rest of the year.

If, despite your best efforts, there's an overstretched knit in your closet, you can always block it. Blocking just means shaping a knit into a certain size. To do this, place the sweater in a barely warm tub of water (use no agitation for animal fibers, especially for woolens), let it soak up the water, and then gently press out the water into a sink (do not wring or twist). For out-of-shape portions of knits, you can dip the overstretched areas in warm to hot water, to encourage shrinkage in the specific spot, but be careful not to over-shrink. Once it's not dripping, place the knit onto a padded towel (two or three layers of towels is fine), and mold the knit with your hands into the shape you want. Once it's in place, use rustproof pins to hold the knit in this shape, pinning knit to towel. Let it dry and the knit will "magically" become the shape you've molded.